Spring kettle

CLEANING THE FILTER :

• Open the kettle lid and remove the filter. Rinse under running water. Replace the filter and ensure that it is securely in place.
• To clean the kettle, use a mild detergent.

TO GET RID OF THE LIMESTONE :

• Fill the kettle one third full of white vinegar and the remaining two thirds full of water, boil and leave overnight.
  
• Empty the contents of the kettle, then fill with water and boil.
• Remove the boiled water, which may contain vinegar residue.
• Rinse the kettle with clean water.

WILFA recommends regular descaling at the following intervals:

•     Water with low limestone: every 3 to 4 months
  
•     Water with medium limestone: every 4 to 6 weeks
•     Water with a high lime content: every 2 to 4 weeks

When using for the first time, remove the first volume of boiling water to remove dust and other impurities.

1. Pour water through the opening provided.

2. Do not pour less than 0.5 litres of water to avoid empty heating. Do not fill beyond the maximum level indicated.

3. Close the lid.

4. Unplug the kettle from the wall socket.

5. Press the power switch.

6. The light will come on when the kettle is switched on.

7. Once the water starts to boil, the safety function will automatically switch off the kettle.

8. Caution! If the kettle is removed from the base, it will automatically switch off, and the water will stop boiling. The kettle can be restarted 30 seconds later by pressing the switch.

9. Remove the kettle from the base before attempting to pour boiling water.

10. Disconnect the appliance from the mains and allow the kettle to cool before moving it.

11. Caution! To stop the heating process, simply turn the switch to the "0" position.